GE Oven F8 error code

F8 is the twin of F5: the electronic oven control has failed its internal checks. Same board-level fault, same rule. Reset power once to clear any glitch, and if F8 stays, the board needs a technician.

Last updated: October 8, 2026

Quick answer: GE oven error code F8: electronic control failure: reset once, then service. The most common cause is failed electronic oven control board. Try this first: reset power at the breaker. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F8 error?

  • Failed electronic oven control board
  • Power surge damaging the control electronics
  • One-time control glitch

How to fix GE F8: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset power at the breaker
    Switch off the circuit breaker to the range or wall oven for a minute or two, then turn it back on and see whether F8 clears. If it returns right away, the board needs replacing.
    Safety warning: Keep the oven off at the breaker until serviced if the code persists.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F8 returns after a breaker reset: the control board likely needs replacing

Frequently asked questions

What does F8 mean on a GE oven?

F8 usually means the electronic oven control needs to be replaced. Reset power at the breaker; if F8 comes back, call a technician.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All GE codes →