GE Oven F6 error code

F6 is one more keypanel code in the F0/F1 family. The control isn't reading the touchpad reliably. Same practical path as the others: one breaker reset, then a service call if it stays.

Last updated: October 8, 2026

Quick answer: GE oven error code F6: keypanel fault: reset power, then call service. The most common cause is failing keypanel touchpad. Try this first: reset power at the breaker. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F6 error?

  • Failing keypanel touchpad
  • Loose keypanel ribbon connection
  • One-time control glitch

How to fix GE F6: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset power at the breaker
    Switch off the circuit breaker to the range or wall oven for a minute or two, then turn it back on and check whether F6 clears. A persistent F6 after a clean reset points at the panel, not the power.
    Safety warning: Keep the oven off at the breaker until serviced if the code persists.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F6 returns after a breaker reset: the keypanel likely needs replacing

Frequently asked questions

What does F6 mean on a GE oven?

F6 usually means a problem with the keypanel. Reset power at the breaker; if the code comes back, the keypanel likely needs replacing.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All GE codes →