GE Oven F4 error code

F4 sits right next to F3: the control is reporting a fault in the oven temperature sensor circuit. Same probe, same job, same practical outcome. A breaker reset rules out a one-time glitch before you call for service.

Last updated: October 8, 2026

Quick answer: GE oven error code F4: oven sensor circuit fault: reset once, then service. The most common cause is failed oven temperature sensor. Try this first: reset power at the breaker. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F4 error?

  • Failed oven temperature sensor
  • Damaged or loose sensor wiring
  • One-time control glitch

How to fix GE F4: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset power at the breaker
    Switch off the circuit breaker to the range or wall oven for a minute or two, then turn it back on and check whether F4 is gone. If the code was a passing glitch, it won't come back.
    Safety warning: Keep the oven off at the breaker until serviced if the code persists.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F4 returns after a breaker reset: the sensor likely needs replacing

Frequently asked questions

What does F4 mean on a GE oven?

F4 usually means the oven temperature sensor circuit has failed. Reset power at the breaker; if it returns, call a technician.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All GE codes →