GE Oven F3 error code

F3 usually means the oven temperature sensor needs to be replaced. That's the small probe inside the oven cavity reporting actual temperature back to the control. When it fails, the control can't regulate heat, so your baking goes sideways.

Last updated: October 8, 2026

Quick answer: GE oven error code F3: oven temperature sensor has failed and needs replacing. The most common cause is failed oven temperature sensor. Try this first: reset power at the breaker. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F3 error?

  • Failed oven temperature sensor
  • Damaged sensor wiring or loose connector
  • Control glitch mimicking a sensor fault

How to fix GE F3: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset power at the breaker
    Turn off the circuit breaker to the range or wall oven for a minute or two, then restore power and check whether F3 clears. If it was a one-time glitch, the oven runs normally from here.
    Safety warning: If F3 returns, leave the oven off at the breaker until it is serviced.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F3 returns after a breaker reset: the sensor likely needs replacing
  • Baking is off (undercooked or burnt food) alongside the code

Frequently asked questions

What does F3 mean on a GE oven?

F3 usually means the oven temperature sensor needs to be replaced. Try a breaker reset first; if F3 comes back, schedule service.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All GE codes →