GE Oven F1 error code

F1 is another keypanel fault, in the same family as F0. The control isn't getting reliable input from the touchpad, so it flags the panel. Heat or moisture around the control panel can trigger it too, especially after heavy cooking or a steamy clean.

Last updated: October 8, 2026

Quick answer: GE oven error code F1: keypanel fault: reset power, likely needs a technician. The most common cause is worn or failing keypanel touchpad. Try this first: reset power at the breaker. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F1 error?

  • Worn or failing keypanel touchpad
  • Heat or moisture reaching the keypanel electronics
  • Loose connection between keypanel and control board

How to fix GE F1: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset power at the breaker
    Switch off the circuit breaker to the range or wall oven for a minute or two, then turn it back on and see if F1 clears. Give it a full minute with the power off so the control fully resets.
    Safety warning: If F1 persists, keep the oven off at the breaker until it is serviced.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • F1 returns after a breaker reset: the keypanel likely needs replacing

Frequently asked questions

What does F1 mean on a GE oven?

F1 usually means a problem with the keypanel. Reset power at the breaker; if the code comes back, a technician likely needs to replace the panel.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All GE codes →