Frigidaire Oven F13 error code

The control found an EEPROM failure. That chip stores the oven's settings and calibration data, and it is not responding. The range cannot run reliably without it.

Last updated: October 8, 2026

Quick answer: Frigidaire oven error code F13: control memory chip has failed. The most common cause is a dead EEPROM on the control board. Try this first: reset the range. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F13 error?

  • A dead EEPROM on the control board
  • A surge that corrupted the control memory

How to fix Frigidaire F13: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset the range
    Cut power for up to 30 seconds by unplugging or flipping the breaker. Worth one attempt, but do not bank on it.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after the reset, the control board likely needs replacing

Frequently asked questions

Can F13 be fixed without replacing parts?

Rarely. If a power reset does not clear it, the board's memory chip is dead and the board has to be replaced. Parts job, not a settings job.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All Frigidaire codes →