Frigidaire Oven F31 error code

The oven's temperature probe is shorted, feeding the control a bad signal it cannot trust. Rather than risk overheating, the oven shuts down.

Last updated: October 8, 2026

Quick answer: Frigidaire oven error code F31: oven temp sensor shorted. The most common cause is a shorted temp probe. Try this first: reset the range. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F31 error?

  • A shorted temp probe
  • Pinched or damaged probe wiring
  • A dead sensor

How to fix Frigidaire F31: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset the range
    Cut power for up to 30 seconds, restore it, and check for the code. A repeat means the probe or its wiring is the fault.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after the reset
  • Oven temperature swings erratically
  • The probe circuit needs professional testing

Frequently asked questions

Can I replace the oven probe myself?

A moderately involved repair behind the back panel, power off. If you are not comfortable inside an appliance, call a tech rather than risking it.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All Frigidaire codes →