Frigidaire Oven F30 error code

The oven's temperature probe circuit is open. The sensor that reports oven temperature is sending nothing, like a cut wire. Without that reading the oven cannot regulate heat, so it shuts down.

Last updated: October 8, 2026

Quick answer: Frigidaire oven error code F30: oven temp sensor circuit open. The most common cause is a disconnected or broken temp probe. Try this first: reset the range. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F30 error?

  • A disconnected or broken temp probe
  • Damaged wiring between probe and control
  • A dead probe sensor

How to fix Frigidaire F30: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset the range
    Cut power for up to 30 seconds, restore it, and watch whether the code clears. A loose probe connection or a control glitch can clear this way.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after the reset
  • The oven will not heat or heats wrong
  • The probe or wiring needs testing, a tech can check resistance

Frequently asked questions

What's the difference between F30 and F31?

F30 means the probe circuit is open, no signal, like a cut wire. F31 means it is shorted and sending a bad signal. Both need the probe circuit checked, for different faults.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All Frigidaire codes →