Frigidaire Oven F3 / F20 error code

The range's control boards have stopped talking to each other. The main oven control cannot trade data with the surface-element or secondary board, so the range usually will not run until communication is restored.

Also shown as: F20

Last updated: October 8, 2026

Quick answer: Frigidaire oven error code F3 / F20: control boards lost communication. The most common cause is a loose harness between the boards. Try this first: reset the range. If the code persists, call a qualified technician. The full guide below walks through 1 fixes in order, with safety warnings.

What causes the F3 / F20 error?

  • A loose harness between the boards
  • A failed secondary control board
  • A failed main oven control
  • A power surge

How to fix Frigidaire F3 / F20: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Reset the range
    Cut power for up to 30 seconds by unplugging or flipping the breaker off and on. If a glitch broke the board handshake, a clean reboot can restore it.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The code returns after the reset
  • The range is partly or fully dead
  • You recently had a power surge

Frequently asked questions

Can I still use the cooktop with F3/F20?

Usually not reliably. The fault sits in the control system that runs the range, so reset first and book service if the code persists.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Oven error codes across brands · All Frigidaire codes →