Samsung Refrigerator PC ER error code

The display panel has lost communication with the main control board, usually because of the wire harness that runs through the top-left door hinge. The fridge may keep running, but the panel cannot talk to the controls.

Also shown as: PC ER, PCER, PC-ER

Last updated: October 6, 2026

Quick answer: Samsung refrigerator error code PC ER: display-to-board communication error. The most common cause is wire harness under the top-left door hinge loose or disconnected. Try this first — power-cycle the refrigerator. If that does not clear it, reseat the wire harness under the top-left hinge.

What causes the PC ER error?

  • Wire harness under the top-left door hinge loose or disconnected
  • Harness pinched or damaged when the door was removed or reinstalled
  • Corroded or bent pins in the harness connector
  • Failed display panel
  • Failed main control board

How to fix Samsung PC ER — step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Power-cycle the refrigerator
    Unplug the fridge for 2 to 5 minutes, then plug it back in. A communication glitch can clear with a reset - if PC ER returns, the harness needs physical attention.
    Safety warning: Unplug the fridge before touching the hinge wiring.
  2. Reseat the wire harness under the top-left hinge
    Unplug the fridge, remove the top-left hinge cover, unhook the wire harness connector, and plug it back in firmly. This single step fixes most PC ER cases, especially after a door was removed.
    Safety warning: Unplug the fridge first - the hinge area carries live control wiring.
  3. Inspect the harness for damage
    With the cover off, look for pinched, cut, or stretched wires and bent connector pins. If the harness was pinched during a door reinstall, straighten the routing so the door no longer traps it.
    Safety warning: Do not splice or tape damaged harness wires as a permanent fix - replace the harness.
  4. Check whether the doors were recently removed
    PC ER very often appears right after delivery or a door reversal. If yours started then, the hinge harness is almost certainly the cause - reseat it before assuming a board failure.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • PC ER returns after reseating the hinge harness
  • The harness wires are cut, pinched through, or corroded
  • The display panel itself needs replacement
  • The main control board needs testing or replacement

Frequently asked questions

Will my food stay cold with PC ER showing?

Usually yes - the cooling system often keeps running on its last settings. But you cannot change temperatures or settings until communication is restored.

PC ER appeared right after delivery. Is that normal?

It is common. Movers remove the doors to fit the fridge through, and the hinge harness does not always get reconnected firmly. Reseat it and the code clears.

Can a power outage cause PC ER?

It can trigger a false one. If a power cycle clears it and it never returns, the outage was the cause. A returning code means a real harness or board problem.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only — not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

Bosch E02 Bosch E03 Frigidaire SB Frigidaire 77 Frigidaire DI SP Frigidaire PF Frigidaire H / HI Frigidaire Door Ajar

All Refrigerator error codes across brands · All Samsung codes →