Frigidaire Refrigerator H / HI error code
The high-temp alarm is sounding. The fridge or freezer has been too warm for over an hour, so the temperature readout blinks and the tone sounds. Most of the time, a door was left open too long.
Also shown as: HI, H
Last updated: October 8, 2026
What causes the H / HI error?
- A door left open or sealing poorly
- A big load of warm food added at once
- A power outage
- A cooling system fault
How to fix Frigidaire H / HI: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Close and seal the doors
Push every door and drawer fully shut and make sure they seal. Check nothing is sticking out and holding a door ajar. - Wait for temperatures to recover
Leave it alone and let the fridge pull temperatures back down. The alarm stops on its own once things are back in range. - Reset if needed
If the alarm hangs on after temperatures recover, press CLEAR ALERTS or unplug for 30 seconds to clear a stuck alarm. Only do this once temperatures are genuinely back in range, or the alarm will just sound again.
When to call a technician
- The alarm returns with every door shut and sealed
- Temperatures never reach safe levels
- The compressor is making unusual noises
Frequently asked questions
What temperature triggers the high-temp alarm?
Frigidaire fires it when the inside stays too warm for over an hour, usually after a door is left ajar. It clears on its own once the temperature recovers.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Refrigerator error codes across brands · All Frigidaire codes →