Frigidaire Refrigerator DI SP error code

There is ice jammed in the dispenser chute. A cube usually gets wedged on the way down, and the fridge alarms to get your attention. The dispenser will not behave until the jam is out.

Also shown as: DISP

Last updated: October 8, 2026

Quick answer: Frigidaire refrigerator error code DI SP: ice is blocking the dispenser chute. The most common cause is cubes jammed in the dispenser chute. Try this first: clear the chute. If that does not clear it, empty and clean the ice bin.

What causes the DI SP error?

  • Cubes jammed in the dispenser chute
  • Melted cubes refroze into a solid clump in the bin

How to fix Frigidaire DI SP: step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Clear the chute
    Peer into the dispenser opening and pick out the cubes you can reach. Ease them loose instead of forcing them; the chute and flap crack under pressure.
    Safety warning: Never put your fingers or tools deep into the chute.
  2. Empty and clean the ice bin
    Pull the bin out, let the ice melt and dump it, then wash the bin and dry it before sliding it back. Fresh ice from the icemaker should dispense normally.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • Jams keep happening with fresh ice in the bin
  • The dispenser motor strains or grinds

Frequently asked questions

Why does my ice keep clumping together?

Unused ice slowly melts and refreezes into one lump. Dumping the bin every week or two stops the clumping.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Refrigerator error codes across brands · All Frigidaire codes →