Kenmore Refrigerator Er CO error code
The main control board and the display board have stopped communicating. The display board passes your temperature settings to the main board, so when that link breaks, the fridge can end up running on the wrong settings or cooling poorly.
Also shown as: ER CO
Last updated: October 8, 2026
What causes the Er CO error?
- A loose or damaged wire harness between the two boards.
- A failing display control board.
- A failing main control board.
How to fix Kenmore Er CO: step by step
Work through these in order, from simplest and safest first. Stop as soon as the code clears.
- Power-reset the refrigerator
Unplug the fridge for five minutes so both boards fully reset, then plug it back in and see if the code clears. Give it the full five minutes: plugging it back in too quickly can leave the boards in the same confused state. - Reseat the harness connections
Unplug the fridge and check the wire harness connections on both the display board and the main control board. Push anything loose back on, and look for pinched or chewed wires.Safety warning: Unplug the fridge before opening any control compartments.
When to call a technician
- The wiring looks fine but the code persists.
- The display is blank, frozen, or showing garbage.
- Cooling is being affected.
Frequently asked questions
Can a power surge cause Er CO?
Yes. A surge can scramble board-to-board communication or damage a board outright. A surge protector on the fridge outlet is cheap insurance.
Sources
Every meaning and fix above was checked against official manufacturer documentation:
FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.
Related error codes
All Refrigerator error codes across brands · All Kenmore codes →