Goodman Furnace 1 (amber LED) error code

One amber flash means the flame-sensing signal is weak. The furnace may still run, but a weak signal often leads to nuisance shutdowns and eventually a lockout.

Also shown as: 1 amber flash, one amber flash, amber LED flashing once, fault code 1 amber, low flame signal

Last updated: October 8, 2026

Quick answer: Goodman furnace error code 1 (amber LED): low flame-sense signal. The most common cause is the flame sensor rod is dirty or oxidized. Try this first: check the simple things first. If that does not clear it, have the flame sensor serviced.

What causes the 1 (amber LED) error?

  • The flame sensor rod is dirty or oxidized
  • The flame sensor is sitting poorly in the flame
  • The burner flame is weak
  • The ground connection is poor

How to fix Goodman 1 (amber LED): step by step

Work through these in order, from simplest and safest first. Stop as soon as the code clears.

  1. Check the simple things first
    Confirm the gas valve is fully open, the thermostat is calling for heat, and the air filter is clean.
  2. Have the flame sensor serviced
    A technician can clean the sensor rod, check its position in the flame, and measure the flame signal in microamps.
    Safety warning: The flame sensor sits inside the burner compartment. Cleaning or adjusting it is a job for a qualified technician; do not reach into the burner area.

When to call a technician

Stop and call a qualified technician if any of these apply:
  • The furnace shuts off and restarts repeatedly
  • The amber flash appears while heating never completes

Frequently asked questions

What is a flame sensor?

A small metal rod that sits in the burner flame and tells the control board a flame is actually present. If its signal is weak, the board cannot be sure the burners lit.

Can a weak flame signal fix itself?

Rarely. Oxidation and positioning problems get worse over time, not better. A quick professional cleaning usually resolves it.

Sources

Every meaning and fix above was checked against official manufacturer documentation:

FixCode provides general troubleshooting information only. It is not professional repair advice. If you are unsure about any step, stop and call a qualified technician. Repairs done incorrectly can be dangerous and may void your warranty.

Related error codes

All Furnace error codes across brands · All Goodman codes →